banner



Home  ›  How To Animate Fire Over Image In Illustrator

How To Animate Fire Over Image In Illustrator

Written By Sunday, June 26, 2022 Add Comment Edit

If you want to create vector flames in Illustrator, in this tutorial I volition show yous how to create an illustration of a burning lucifer using a fire slope. You'll larn how to brand a realistic match flame that is also fully scalable.

And if yous need some vector flames, only y'all desire to salvage time, you lot can always download these realistic vector fire graphics from Envato Elements:

fire graphic vector fire graphic vector fire graphic vector

What You lot'll Learn in This Vector Flames Illustrator Tutorial

  • How to create a burning match in Illustrator
  • How to create a vector fire graphic
  • How to create a fire gradient mesh
  • How to create vector flames in Illustrator

Follow forth with united states of america over on our Envato Tuts+ YouTube aqueduct:

i. How to Create a Vector Matchstick

Footstep 1

Create a new document in the RGB color fashion. Accept the Rectangle Tool (M) and create a black rectangle. This will be our background. Lock this layer.

draw black rectangle draw black rectangle draw black rectangle

Stride 2

Create a New Layer. Take the Rectangle Tool (M) over again and depict a rectangle in the shape of a matchstick. Now fill information technology with a linear gradient of diverse shades of dark-brown to convey the light distribution at the edges of the friction match. Here are the shades I used:

  • #482217
  • #efd195
  • #994521
add brown gradient add brown gradient add brown gradient
create gradient match stick create gradient match stick create gradient match stick

Step 3

Copy this rectangle and paste it in forepart with Control-F. Now slightly reduce the top of the rectangle and fill it with a new linear gradient. The shades of brown on this rectangle should exist darker than the ones on the bottom rectangle. Here are the values I used:

  • #310901
  • #996148
  • #782803
add another gradient add another gradient add another gradient
brown gradient applied brown gradient applied brown gradient applied

Stride four

Select both rectangles and become to Object > Blend > Brand. Then become to Object > Blend > Blend Options and set the Spacing to Specified Steps, 50.

create blend transition create blend transition create blend transition
blend two gradients blend two gradients blend two gradients

Step 5

Create another rectangle of the same width as the previous i. Add a Gradient Make full as shown hither. The values I used are:

  • #340900
  • #984420
  • #792702
create another gradient create another gradient create another gradient
gradient result gradient result gradient result

Step 6

Set the Opacity to 0%.

set opacity to 0 set opacity to 0 set opacity to 0

Step 7

Re-create the rectangle and paste information technology in front (Control-F). Then resize it to make it very thin, and set its Opacity back to 100%.

make the rectangle thinner make the rectangle thinner make the rectangle thinner

Pace 8

Select the concluding two rectangles and go to Object > Blend > Make.

blend the rectangles blend the rectangles blend the rectangles

ii. How to Create a Vector Match Head

Step ane

Take the Ellipse Tool (L) and create a red circle (#e20612) aligned to the horizontal axis of the matchstick.

draw red circle draw red circle draw red circle

Step ii

Take the Direct Choice Tool (A) and double-click the point on the left. Agree Shift an drag it to the left. So take the Pen Tool (P) and add a new anchor point at each intersection of the head and the matchstick.

reshape the circle reshape the circle reshape the circle

Step 3

Hold Alt and click both new anchor points to cutting their handles. Then have the Directly Choice Tool (A) and elevate the indicate between them towards the head.

add anchor points add anchor points add anchor points
pull the anchor point back pull the anchor point back pull the anchor point back

Step iv

Make full the match head with a radial gradient that goes from dark dark-brown to its light shades. Hither are the shades I used:

  • #210900
  • #994521
  • #f1ce94
add new gradient add new gradient add new gradient
add graient to match head add graient to match head add graient to match head

Pace 5

Copy and paste the shape of the caput to the back with Control-B. Fill the copy with a solid night-dark-brown color (#340900) and shift it slightly to the left.

add shadow to match head add shadow to match head add shadow to match head

Step six

Take the Pen Tool (P) and create a place where the woods is burnt. Fill up these areas with a linear slope composed of nighttime shades of chocolate-brown color. Here are my shades:

  • #492117
  • #240700

Motion these two objects beneath the lucifer head layers.

add brurned wood effect add brurned wood effect add brurned wood effect

Step 7

Time to create pores on the match head. Accept the Ellipse Tool (Fifty) and describe an ellipse. Take the Eyedropper Tool (I) and agree Shift to option the color from the expanse to the right.

add a small ellipse add a small ellipse add a small ellipse

Footstep 8

Re-create and paste the ellipse in front (Control-F), reduce its size, and make full it with a solid dark dark-brown (the same as the shadow under the match head).

copy the ellipse copy the ellipse copy the ellipse

Step ix

Utilise this technique to create more than pores on the lucifer head.

create pores in match head create pores in match head create pores in match head

3. How to Create a Vector Match Flame

Step 1

At present I'll show you how to create the match flame. Lock this layer and create a new one. Drag it under the previous layer. Take the Ellipse Tool (L) and draw a big red circumvolve (#e20612). Using the Direct Selection Tool (A), pull the top anchor indicate up.

create flame shape create flame shape create flame shape

Step 2

Select the shape of the flame, and get to Object > Create Slope Mesh. Set the number of rows and columns in the dialog box.

create gradient mesh create gradient mesh create gradient mesh

Step 3

Use the Straight Option Tool (A) to distort the grid a footling. Every flame is different, so you don't accept to re-create me directly.

warp the gradient mesh warp the gradient mesh warp the gradient mesh

Step 4

Select the gradient mesh with the Option Tool (5) and make full it with blackness. Fix its Blend Mode to Screen.

change blend mode to screen change blend mode to screen change blend mode to screen

Step 5

At present you can colour the flame. Select the grid nodes and apply yellow and scarlet colors to them. Nodes that lie beyond the borders of the gradient mesh should remain black, otherwise we would get the sharp edges of the flame, which looks wrong.

Here are the colors I used for the flame:

  • #fff38d
  • #d14507
add colors to gradient mesh add colors to gradient mesh add colors to gradient mesh

Step vi

Lock this layer and create a new one on summit. Take the Pen Tool (P) and draw a similar shape. Plough it into a Slope Mesh with 4 Rows and Columns, and add colors to it with the same technique. The colors I used are:

  • #faeda7
  • #d7651e
  • #e78c43
draw fire shape draw fire shape draw fire shape
add gradient mesh add gradient mesh add gradient mesh
color the flame with gradient mesh color the flame with gradient mesh color the flame with gradient mesh

Step vii

Ready its Blend Mode to Screen.

change blend mode change blend mode change blend mode

Footstep viii

At present create two more than feathers of the flame with the same technique of creating a fire slope.

create new flame shape create new flame shape create new flame shape
add colors to new flame shape add colors to new flame shape add colors to new flame shape
duplicate the flame duplicate the flame duplicate the flame
flame finished flame finished flame finished

4. How to Create Vector Fume

Step 1

There is no smoke without fire, and vice versa, so let'south add together some smoke. Lock the previous layer and create a new one. Take the Rectangle Tool (M) and create a rectangle filled with black. Ready its Blend Mode to Screen.

draw black rectangle draw black rectangle draw black rectangle

Pace 2

Keep the rectangle selected, and create a Slope Mesh with two Rows and iii Columns.

create gradient mesh create gradient mesh create gradient mesh

Pace 3

Make the two bottom points blueish (#7ba9ca).

add blue points add blue points add blue points

Step iv

At present we need to bend the rectangle shape into the shape of a smoke stream. Place the rectangle close to the flame, and then have the Lasso Tool (Q) and select all the nodes of the grid on the right.

select part of the mesh select part of the mesh select part of the mesh

Footstep 5

Take the Rotate Tool (R) and ready the center rotation at the eye point of the left side. And so rotate the selection to bend the rectangle.

rotate the mesh to bend it rotate the mesh to bend it rotate the mesh to bend it

Step half-dozen

Select the right half of the shape now.

select half of the mesh select half of the mesh select half of the mesh

Step 7

Bend this selection past placing the center of the rotation in this spot:

rotate the mesh again rotate the mesh again rotate the mesh again

Pace 8

Additionally, you can move individual nodes using the Directly Selection Tool (A) to go more than control over the final shape.

bend the mesh bend the mesh bend the mesh

Step 9

Move the smoke layer nether all the other layers. Create a few more streams of smoke using the aforementioned technique. Feel gratuitous to use different shades of blueish. You can also hide the flame layers to see the smoke meliorate.

create another streak of smoke create another streak of smoke create another streak of smoke
create subtle smoke create subtle smoke create subtle smoke
create bent smoke create bent smoke create bent smoke
create complex smoke effect create complex smoke effect create complex smoke effect
smoke and flame smoke and flame smoke and flame

5. How to Create the Concluding Composition

Footstep ane

When working with gradients, information technology's easier if an object is placed vertically or horizontally. But this composition looks pretty boring. And so at present unlock all the layers except the background and rotate the whole called-for friction match for a more interesting composition. At this point, yous tin too resize the background to fit the composition amend.

rotate all layers rotate all layers rotate all layers

Step 2

Copy the background rectangle, select the height layer, and paste it in front end (Command-F). Select All (Control-A), and then become to Object > Clipping Mask > Brand.

create clipping mask create clipping mask create clipping mask

Conclusion

Having mastered the techniques described in this tutorial, you tin can create realistic vector flames, lighters, or torches. Who knows, you lot might want to make a fire! And requite it some heat!

vector flames illustrator vector flames illustrator vector flames illustrator

Practise you want to try other tutorials about creating vector effects? Check out our recommendations:


Source: https://design.tutsplus.com/tutorials/create-a-burning-vector-match-using-gradient-meshes--vector-4349

Posted by: richardwhichosedn.blogspot.com

0 Response to "How To Animate Fire Over Image In Illustrator"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel